Get the amazing opportunity to own a 3d printed model of one of the incredible Starship prototypes. This model is a replica of SN10 which flew on March 3, 2021 at 23:15 UTC.

Starship SN10 was the third fully assembled Starship to be launched and the first one to successfully flip and land. Powered by three (3) Raptor engines, RSN 39, 50 and 51, SN10 successfully launched all the way up to 10km (33,000 ft). It then performed the skydive/bellyflop descent maneuver, relit all three (3) engines fueled by the CH4 and LOX header tanks and attempted the flip maneuver.

Unfortunately, SN10 landed hard with a slight lean and a fire near the base. Eight (8) minutes later, Sn10 exploded. The cause was probably due to partial helium ingestion from the fuel header tank.


This model has been printed on one (1) Prusa i3 Mk3S+ printers with Prusament PLA filament and is numbered "SN10-01".


It took several hundred hours of print time and dozens of hours of cleaning and assembly.


Starship 3D models are designed to be assembled and disassembled countless times to offer the possibilities to explore every bit of these amazing rockets.


What's included:

- 7 sections

- 2 aft flaps

- 2 forward flaps

- 4 steel shaft

- 2 aft aero covers

- 2 aft aero covers tips

- 3 Raptor engines

- 2 sets of flap chains

- 1 CH4 downcomer with the header tank cap

- 1 transport stand

- 2 ring stands

- 2 display stands

- 1 flap removal tool

- 1 instructions booklet




I gladly accept cancellations

Request a cancellation within: 24 hours of purchase

I don't accept returns or exchanges

But please contact me if you have any problems with your order.





  • - 1/50 scale

    - Dimensions: 100cm x 36cm x 18cm

    - Weight: ~2.5kg